Adjusting The Dynamic Range Of The Audio Soundtrack; Setting The Digital Audio Output To Be Compatible With Your Av Component - Pioneer DV-440 Operating Instructions Manual

Adjusting the Dynamic Range
of the Audio Soundtrack
Audio DRC stands for Audio Dynamic Range
Compression. When Audio DRC is on, soft sounds such
as dialog can be heard more clearly without making loud
sounds even louder. When Audio DRC is set to [Off],
there is no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup
screen Audio 1 menu.
Audio1 A2
Dolby Digital Out
96kHz PCM Out
Dynamic playback at low volume
Settings: Off*
On
Notes
• Audio DRC is only effective with Dolby Digital audio
sources.
• If you have set the player to convert Dolby Digital audio to
PCM, also make sure that you set the [Digital Out] to
[On] to hear the Audio DRC effect.
• The effect of Audio DRC depends on your speakers and
AV amplifier settings.
26
En
– DVD
Video1 V2 Language General
Audio DRC — Off
On
DTS Out — Off
— 96kHz 3 48kHz
— MPEG 3 PCM
MPEG Out
Move SETUP Exit
*Factory setting
Setting the Digital Audio
Output To Be Compatible with
Your AV Component
This player is capable of digital audio output for Dolby
Digital, DTS, MPEG, and signals with a sampling rate of
96 kHz. Make settings in the Setup screen Audio 1
menu to reflect the capabilities of the components that
you have made digital connections to.
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been
set by the player.
• If you have made only stereo line connections (analog)
using the supplied audio cord, it is not necessary to make
any changes in this menu.
Dolby Digital Out
This player is capable of outputting the Dolby Digital
surround sound audio signal. When the player is
connected to an AV component that has a built-in Dolby
Digital decoder, select [Dolby Digital]. This player can
also convert the Dolby Digital signal to a digital Linear
PCM signal, the same digital signal output from a CD.
Select [Dolby Digital 3 PCM] when you have made
connections to an amplifier or receiver with a Dolby Pro
Logic decoder or a Digital Analog Converter (DAC).
Audio1 A2 Video1 V2
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Change Dolby Digital output mode
Move
Settings: Dolby Digital*
Dolby Digital 3 PCM
– DVD
Language General
— Off
— Dolby Digital
Dolby Digital 3 PCM
96kHz 3 48kHz
—
MPEG 3 PCM
—
Exit
SETUP
*Factory setting