Getting Started Using Your Dvd Player; Playing Dvds, Super Vcds/Video Cds, Cds And Mp3S - Pioneer DV-440 Operating Instructions Manual

Getting Started
Using Your DVD
Player
Playing DVDs, Super VCDs/
Video CDs, CDs and MP3s
– DVD/Super VCD/VideoCD/CD/MP3
Before you can start to enjoy the digital audio and video
on DVDs, be sure that you have either performed the
Setup Navigator procedure described in the previous
section or made the necessary settings in the Setup
screen menus as outlined in the next section to set up
the player to correspond to your home system. Having
made these settings, you are now ready to start using
the player to enjoy DVDs, Super VCDs/Video CDs, CDs
and MP3s.
1
5
4
1 2
DV-533K
MIC VOLUME ECHO
STANDBY/ON
0
MIN–MAX MIN–MAX
20
En
OPEN/
LAST CONDITION CLOSE
MEMORY MEMORY 2
REPEAT
AUDIO SUB TITLE ANGLE
REPEAT
A-B
MENU TOP MENU
SETUP
RETURN
DISPLAY
5 5 ¶
¶
5
3
2
NEXT
PREV
¢
4
5
∞ ¶
¶
3 8
7
STOP PLAY PAUSE
¶
1 ¡
e E
REV FWD
STEP/SLOW
2 3
1 CLEAR
5 6 +10
4
¶
9 0
7 8
RANDOM PROGRAM SEARCH MODE
Î
3 4
8 Î
7
4 1 ¡ ¢
3
1
Press
panel).
2
Press OPEN/CLOSE (0 on the front panel).
The disc tray comes out.
3
Load a disc.
Load a disc with the label side facing up, using the
disc tray guide to align the disc.
4
Press PLAY 3 (3 on the front panel).
• The disc tray closes, and playback begins.
• MP3 only: It may take a few seconds for the
player to locate the track on the disc, depending
on the complexity of the file structure. During this
time, "Please wait a moment" is displayed.
• Depending on the disc, a menu may be
displayed. If a menu is displayed, proceed to
step 5.
5
Select the item you want to view.
• When a DVD is loaded:
Select the item with the cursor buttons (2/3/5/
∞) or the number buttons then press ENTER.
• When a Super VCD/Video CD is loaded:
Use the number buttons to select the item.
Notes
• Noise is output if you make digital audio connections to a
receiver or amplifier that does not have a built-in decoder.
Check that the digital audio output format selected in the
Audio 1 menu corresponds to the audio components you
have made connections to (pages 26, 27).
• The TV screen size is factory set to present the wide
screen format (16:9 aspect ratio). If you have a standard TV
screen (4:3 aspect ratio), this setting can be changed to
match your TV screen size in the Video 1 menu (page 29).
DVD PLA YER
When an operation is prohibited
There are times when you are using the player and attempt to
perform an operation, but for some reason it cannot be
performed. When this occurs, one of the two following icons
appears on the screen.
The operation is prohibited by the player.
The operation is prohibited by the programming on
the disc.
( STANDBY/ON on the front