Easy Connections - Pioneer DV-350 Operating Instructions Manual

Connecting Up

Easy connections

TV
DIGITAL AUDIO OUT
COAXIAL
OPTICAL
S
VIDEO OUT
The setup described here is a basic setup
that allows you to play discs using just the
cables supplied with the player. In this setup,
stereo audio is played through the speakers
in your TV.
• This player is equipped with copy
protection technology. Do not connect
this player to your TV via a VCR (or your
VCR via this player) using AV cables, as
the picture from this player will not
appear properly on your TV. (This player
may also not be compatible with some
combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
A/V IN
AUDIO OUT
L
AV CONNECTOR (RGB)-TV
R
To power outlet
1 Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable, connect-
ing the red and white plugs to the audio
outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to use a SCART cable
for the audio/video connection, or an S-Video
cable for the video connection.
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
02
11
En