Parental Lock - Pioneer DV-270-S Operating Instructions Manual

Pioneer corporation operating instructions dvd player dv-270-s, dv-373-s, dv-373-k
Table of Contents

Advertisement

Initial Settings menu

Parental Lock

• Default level: Off; Default password: none;
Default Country code: us (2119)
To give you some control over what your
children watch on your DVD player, some DVD-
Video discs feature a Parental Lock level. If
your player is set to a lower level than the disc,
the disc won't play.
Some discs also support the Country Code
feature. The player does not play certain
scenes on these discs, depending on the
Country Code you set.
Note
• Not all discs use Parental Lock, and will
play without requiring the password first.
• If you forget your password, you'll need to
reset the player to register a new password.
(see Resetting the player on page 36)
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country code.
1
Select 'Password'.
2
Use the number buttons to enter a 4-
digit password.
The numbers you enter show up as asterisks
(*) on-screen.
3
Press ENTER to register the password.
You will return to the Options menu screen.
Changing your password
To change your password, confirm your
existing password then enter a new one.
1
Select 'Password Change'.
2
Use the number buttons to enter your
existing password, then press ENTER.
3
Enter a new password and press ENTER.
This registers the new password and you will
return to the Options menu screen.
Setting/changing the Parental Lock
1
Select 'Level Change'.
2
Use number buttons to enter your
password, then press ENTER.
3
Select a new level and press ENTER.
• Press
(cursor left) repeatedly to lock
more levels (more discs will require the
password); press
unlock levels. You can't lock level 1.
This sets the new level and you will return to the
Options menu screen.
Setting/changing the Country code
You can find the Country code list on page 38.
1
Select 'Country Code'.
2
Use number buttons to enter your
password, then press ENTER.
3
Select a Country code and press ENTER.
There are two ways you can do this:
• Select by code letter: Use
down) to change the Country code.
• Select by code number: Press
right) then use the number buttons to enter
the 4-digit Country code.
The new Country code is set and you will return
to the Options menu screen. Note that the new
Country code doesn't take effect until the next
disc is loaded (or the current disc is reloaded).
(cursor right) to
(cursor up/
(cursor
07
33
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-373-kDv-373-s

Table of Contents