Video Output Settings - Pioneer DV-210K-K Operating Instructions Manual

Setting
08
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out

Video Output settings

Setting
TV Screen
(This setting effective
for analog and HDMI
video output. See also
Screen sizes and disc
formats on page 43.)
Component Out
36
En
Option
Dolby Digital
Dolby Digital > PCM
DTS
DTS > PCM
(for DV-410V)
Off
96kHz > 48kHz
96kHz
MPEG
MPEG > PCM
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
16:9 (Compressed)
(DV-410V only)
Progressive
Interlace
What it means
Dolby Digital encoded digital audio is output when
playing a Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio
before being output.
DTS encoded digital audio is output when playing a
DTS disc. (Noise will be output if your amplifier/
receiver is not compatible with DTS audio.)
No digital audio is output when playing a DTS
disc.DTS audio is converted to PCM audio before
being output.
No digital audio is output when playing a DTS disc.
96 kHz digital audio is converted to 48 kHz for
digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is output as is.
MPEG encoded digital audio is converted to PCM
audio for digital output.
What it means
Set if you have a conventional 4:3 TV. Widescreen
movies are shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen
movies are shown with the sides cropped so that
the image fills the screen.
Set if you have a widescreen TV.
Can be selected when you are connected via
HDMI, and have the HDMI Resolution set to
1920x1080p, 1920x1080i or 1280x720p. Video in
4:3 can be properly displayed on a 16:9 high
definition television (with black bars shown on
either side of the screen).
Set if your TV is compatible with progressive scan
video (see your TV's instruction manual for details).
The PRGSVE indicator lights in the front panel
display. See also Switching the video output to
interlace using the front panel controls on page 12.
Note that progressive scan video is only output from
the component video jacks.
Set if your TV is not compatible with progressive
scan video.