Fault Indication; External Signal Terminal Block; Figure 4-14 Main Screen (Fault Indication); Figure 4-15 Message Screen - Toshiba G9000 SERIES Installation And Operation Manual

4.3.4

Fault Indication

"MESSAGE" and "SILENCE ALARM" icons will appear on the main menu when UPS failure condition has
occurred.
The following will be displayed when the MESSAGE icon on the main menu is pressed.
1) MESSAGE
The display shows a fault code, the description of the fault and a guidance of what action is to be taken by the
user. A maximum of 10 faults are displayed at one time. If an input power failure occurs during a fault condition,
the fault indication and input power failure announcement are alternatively displayed at 5 second intervals.
2)
SILENCE ALARM
This icon will appear when a failure occurs. The audible alarm (announcing the failure) can be silenced by
pressing this icon.
4.4

EXTERNAL SIGNAL TERMINAL BLOCK

The UPS is equipped with a series of input/output terminals for external annunciation of alarms and for
remote access of certain UPS functions. The layout of terminals is shown in Figure 4-16 with a functional
description of the input/output port presented. OUT1 to OUT8 are user programmable, but are factory
default set being also shown in Figure 4-16.
Adding same external I/F PCB "IOAU-19", doubling signal outputs is applicable for OUT1 to OUT8.
24

Figure 4-14 Main screen (Fault indication)

Figure 4-15 Message Screen

G9000 Installation and Operation Manual – 61480-012