Getting Started; Switching On; Let's Get Started - Pioneer 655A Operating Instructions Manual

Getting Started

Switching on

After making sure that everything is con-
nected properly and that the player is
STANDBY/ON on the
plugged in, press
front panel, or on the remote control to
switch the player on.
Also, switch on your TV and make sure that it
is set to the input you connected the DVD
player to.
STANDBY/ON
STANDBY/ON
PROGRESSIVE VIDEO OFF
Î
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the
correct video input (not a TV channel).
For example, if you connected this
player to the VIDEO 1 inputs on your TV,
switch your TV to VIDEO 1.
• If you connected this player to an AV
receiver, make sure that the receiver is
switched on and set to the correct input.
• You can also use the 0 OPEN/CLOSE
button to switch on the player and open
the disc tray at the same time.
• This player features a screen saver.
If the player is stopped or paused and
no button is pressed for five minutes,
the screen saver starts.

Let's Get Started

When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can set
up the player to work with the kind of TV you
have, then either use the Setup Navigator to
make more settings, or jump right in and
start playing some discs.
Before continuing, make sure that you've
loaded the batteries in the remote control.
OPEN/CLOSE
0
• For customers in Taiwan: The default on-
41 ¡
screen menu language is Traditional
Chinese. Use the instructions below to
complete the Let's Get Started setup,
then see page 72 for instructions on
changing the on-screen display lan-
guage to English.
ENTER
GUIDE RETURN
04
23
En