Pioneer DRM-604X Driver Installation Manual page 63

Appendix D
CM Command
nKL Key Lock
LO Lead Out
NF Scan Forward
NR Scan Reverse
?O Read ISRC
?P Mode Request
PA Pause
PL Play
?Q TOC Request
?Q TOC Request
?R Track Request
RJ Reject
aSA Start
aSE Search
Owner's Manual / Software Driver Installation Guide
(CDP) CD Player Commands
Drive Action
Enables or disables the front panel eject button. n = 0:
Enabled. n = 1: Disabled
Lead Out Adress
Scans forward about 15 seconds; audio attenuated by 12 dB.
Scans backwards about 15 seconds; audio attenuated by 12dB.
Returns the 15 digit International Standard Recording Code
for the current track. (DRM-604X series only)
Returns three digit string representing player mode: P00 -
Home (No Magazine), P01 - Park Mode, P04 - Play Mode,
P06 - Pause Mode, P20 - Home Mode (Magazine Inserted)
Enters Pause mode at the current address.
Enters Play mode and begins audio play.
Returns TOC data as a 10 digit string (FFLLEEEEEE), where
FF represents the first track, LL represents the last track
number, and EEEEEE represents the lead-out address in
MMSSFF format.
Returns TOC data for track n as an eight digit string
(EEEEEETT), where EEEEEE represents the absolute start
address of the track in MMSSFF format, and TT represents
the track type. 00 means audio, 04 means data.
Returns a two digit string representing the current track. In
Park mode, XX is returned. 00 is returned when the current
address is in the lead-in area, an AA when in lead-out.
Stops the disc and enters Park mode.
Starts disc rotation. The drive will pause at the beginning of
the first audio track.
Searches to address a and enters Pause mode.
D-3