Quick Installation; Figure 3 - Dos/Windows - Quick Install Process - Pioneer DRM-604X Driver Installation Manual

Cd-rom changers
Table of Contents

Advertisement

Chapter 3

Quick Installation

Installing software drivers so you can use your Pioneer CD-ROm Changer with
your computer is easy! This flow chart details the installation process. If you are
installing from the DOS prompt, follow the DOS instruction path on the left side
of the chart. If you are installing from WINDOWS, follow the path on the right.
DOS
Insert the IBM-PC & Compatible Driver Diskette
At the DOS Prompt, Type A: or
B: for the letter of the drive you
are installing the software from,
then Press [ENTER].
At the A:\ or B:\ DOS Prompt, type
INSTALL and press [ENTER]. This
will begin the Installation Program.
Note: The screen may go blank for a few seconds while the
program
loads.
To execute a Quick Installation of the drivers, select the QUICK INSTALL
option from the main menu, accept the default options and press [ENTER].
See the following pages for details about using the installer.
You will then see this message: Installation Completed Successfully!
Exit the Install Program, reboot your computer and you are ready to use
your Changer. (See page 3-9, Using your Pioneer CD-ROM Changer.)

Figure 3 - DOS/WINDOWS - Quick Install Process

3-2
IBM DOS / WINDOWS Driver Installation
into the floppy drive on your computer.
At the DOS prompt type WIN to
bring up WINDOWS.
Click on the F
Menu Bar and click on the R
option. In the pop-up dialog box,
type A:INSTALL or B:INSTALL.
Software Driver Installation Guide / Owner's Manual
WINDOWS
option in the
ILE
UN

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DRM-604X and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Drm-602x

Table of Contents