Using Its Playlists - Pioneer SRC7127-B/N Operation Manual

Available accessories
Function name Operation
Refer to Selecting a repeat play
range on page 13.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
REPEAT
as below:
! MCD – Repeat all discs in the
multi-CD player
! TRACK – Repeat just the cur-
rent track
! DISC – Repeat the current disc
Refer to Playing tracks in random
RANDOM
order on page 13.
Refer to Scanning folders and
SCAN
tracks on page 13.
Refer to Using ITS playlists on this
ITS-PLAY
page.
Refer to Pausing disc playback on
PAUSE
page 13.
Refer to Using compression and
BMX on page 13.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
COMP/DBE
of BMX.
The settings can be switched as
below:
OFF—COMP 1—COMP 2—OFF—
DBE 1—DBE 2
Refer to Using disc title functions
TITLE IN
on the next page.
Refer to Using ITS playlists on this
ITS
page.
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to TITLE IN. The disc title has already
been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1 Play a CD that you want to program.
Press a or b to select the CD.
2 Press FUNCTION and hold until TITLE IN
appears in the display, then press
FUNCTION to select ITS.
3 Select the desired track by pressing c
or d.
4 Press a to store the currently playing
track in the playlist.
ITS IN is displayed briefly and the currently
playing selection is added to your playlist. The
display then shows ITS again.
5 Press BAND to return to the playback
display.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Playing tracks in random order on
page 13.
Section
03
29
En