Basic Operations; Power On/Off; Selecting A Source - Pioneer DEH-P690UB Operation Manual

Operating this unit
d Joystick
Move to perform manual seek tuning, fast
forward, reverse and track search controls.
Also used for controlling functions.
Functions are the same as
MULTI-CONTROL except for volume con-
trol.
e DIRECT button
Press to directly select the desired track.
f CLEAR button
Press to cancel the input number when 0 to
9 are used.
g 0 to 9 buttons
Press to directly select the desired track,
preset tuning or disc. Buttons 1 to 6 can op-
erate the preset tuning for the tuner or disc
number search for the multi-CD player.
h PGM button
Press to operate the preprogrammed func-
tions for each source. (Refer to Using the
PGM button on page 34.)
i ATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
j ENTERTAINMENT button
Press to change to the entertainment dis-
play.
k AUDIO button
Press to select various sound quality con-
trols.

Basic Operations

Power ON/OFF

Turning the unit on
% Press SOURCE to turn the unit on.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.

Selecting a source

You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 14).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
XM tuner—SIRIUS tuner—Tuner—Televi-
sion—DVD player/Multi-DVD player—
Built-in CD player—Multi-CD player—
iPod—USB—External unit 1—External
unit 2—AUX1—AUX2—BT Audio—BT Tel-
ephone
Notes
! In the following cases, the sound source will
not change:
— When there is no unit corresponding to the
selected source connected to this unit.
— When there is no disc or magazine in the
player.
— When the AUX (auxiliary input) is set to off
(refer to page 30).
— When the BT Audio source is set to off
(refer to Activating the BT Audio source on
page 32).
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
ary setting on page 30).
! Charging the portable audio player using
car's DC power source while connecting it to
AUX input may generate noise. In this case,
stop charging.
Section
02
11
En