The Stand On The Parent Unit; Using Your Baby Monitor; Power On Or Off The Baby Unit; Power On Or Off The Parent Unit - Motorola MBP482PU User Manual

Doc Title : Product Data – User's Guide
Model : MBP482
2.3

The stand on the parent unit

• Pull the stand out so that parent unit can stand.
3

USING YOUR BABY MONITOR

Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a
substitute for responsible, correct parental supervision.
3.1

Power on or off the baby unit

- Press and hold
- Press and hold
3.2

Power on or off the parent unit

- Press and hold
- Press and hold
NOTE
If you place the parent and baby units too close together, you may hear a high pitched noise. This is not a fault.
The units are designed to be operated at some distance apart, e.g. in separate rooms, so move the units further
apart.
3.3

Turn off the parent unit screen

You can turn on or off the parent unit screen without powering off the parent unit. You can still hear sound from the
baby unit.
- Press and hold
- Press any key on the parent unit to turn on the screen again.
3.4

Adjust the speaker volume for parent unit

You can adjust the speaker volume from Volume 1 to Volume 5, or turn it off.
- Press or on the parent unit when it is not in use.
When the speaker volume is set to off, the screen displays
This document contains confidential and proprietary information of VTech Telecommunications Ltd
to turn on the baby unit. The Power/Link indicator turns on.
again to turn off the baby unit. The Power/Link indicator light turns off.
to turn on the parent unit. The Power indicator turns on.
again to turn off the parent unit. The Power indicator turns off.
on the parent unit to turn off the screen..
Revision :
Page(s) :
.
R.00
11 of 17