Scanning Tracks Of A Cd; Pausing Cd Playback; Using Disc Title Functions; Entering Disc Titles - Pioneer DEH-P44 Operation Manual

Section
Built-in CD player
04

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press
FUNCTION
Press
FUNCTION
display.
2 Press 5 to turn scan play on.
appears in the display. The first 10
T-SCAN :ON
seconds of each track is played.
3 When you find the desired track press ∞ to
turn scan play off.
appears in the display. The track
T-SCAN :OFF
will continue to play.
• If the display has automatically returned to
the playback display, select
pressing
FUNCTION
Note
• After scanning of a CD is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
16
En
to select .
T-SCAN
until appears in the
T-SCAN
again by
T-SCAN
.
1 Press to select
FUNCTION
Press until
FUNCTION
display.
2 Press 5 to turn pause on.
appears in the display. Play of the
PAUSE :ON
current track pauses.
3 Press ∞ to turn pause off.
appears in the display. Play will
PAUSE :OFF
resume at the same point that you turned pause
on.

Using disc title functions

You can input CD titles and display the title. The
next time you insert a CD for which you have
entered a title, the title of that CD will be dis-
played.

Entering disc titles

Disc title input lets you input CD titles up to 10
letters long and up to 48 disc titles into the built-
in CD player.
1 Play a CD that you want to enter the title.
2 Press and hold until
FUNCTION
appears in the display.
.
PAUSE
appears in the
PAUSE
TITLE IN