Adjusts the horizontal centering. Press + to move the
picture to the right and press - to move it to the left.
Adjusts the vertical centering. Press + to move the
picture up and press - to move it down.
Adjusts the horizontal picture size. Press + to enlarge the
horizontal size and press - to diminish it.
Adjusts the vertical picture size. Press + to enlarge the
vertical size and press - to diminish it.
Select to restore the factory settings in MENU 2.
Select to demagnetize the screen. Wait for 10 minutes or
more before activating this feature again. The same
interval is needed after turning on the monitor.
Select to return to the MENU 1 screen.
Adjusts the picture sharpness. Press+ for more
sharpness or press - for less sharpness. (This adjustment
has no effect on the pictures of RGB signals.)
Select ON to emphasize sharpness and to reproduce a
clear picture. (This adjustment has no effect on the
pictures of RGB signals.)
Select ON for a 16:9 picture signal.
Select ON when the monitor does not recognize the PAL
signal. (You must select ON when the PAL60 signal is
Select the color temperature from among 9300K, 6500K
Select to restore the factory settings in MENU 3.
Select to return to the MENU 2 screen.
TILT CORRECT: 00
Adjusts the picture tilt due to the influence of the earth's
magnetism. Press+ to rotate the picture clockwise and
press - to rotate it counterclockwise.
~ INDEX NO.
Sets the index number of the monitor. You cannot set the
number with the remote commander. Use the keys on
the monitor. For more information about the index
number, see "Operating a specific monitor with the
Select-to return to the MENU 3 screen.