Download Print this page

Dj Player Operation; Playback Operations With Auto Cue Function On; Cueing By Frames; Utilisation Du Lecteur Dj - Pioneer CDJ-500S Operating Instructions Manual

Compact disc player
Hide thumbs Also See for CDJ-500S:

Advertisement

BASIC OPERATIONS II/DEMARCHES DE BASE II
DJ PLAYER OPERATIONS
Playback Operations with Auto Cue
Function ON
These represent basic playback operations when the auto
cue function is on (the display's AUTO CUE indicator is lit).
1. Press the EJECT button (0).
2. Load a compact disc.
÷ Set the disc in the center of the tray with the label
side up.
÷ When loading an 8-cm disc, set the disc in the groove
in the very center of the tray.
÷ Load only one disc at a time.
3. Press the front of the disc door to close.
4. Press the PLAY/PAUSE button (6).
÷ Press this button only after the cue indicator (CUE) is
lit. Playback will begin immediately.
7 When playback of one track ends, the player advances
to cue the beginning of the next track and enters the
standby mode. The cue indicator (CUE) lights, and the
6 indicator flashes indicating the unit is in playback
standby mode. When the PLAY/PAUSE button (6) is
pressed, the cued track will playback immediately.

Cueing by Frames

7 Jog dial
During playback, press the PLAY/PAUSE button (6)
to enter standby mode, then rotate the jog dial to cue
by frame.
÷ Cueing is performed in increments of single frames
by rotating the jog dial.
÷ When the jog dial is rotated clockwise, the player
cues forward; rotate counterclockwise to cue in the
reverse direction.
÷ When the jog dial is turned at a speed of about 1
rotation per second, normal playback sound will be
produced (75 frames = 1 second).
16
<DRB1214>
En/Fr
TIME MODE/AUTO CUE
D
PROFESSIONAL
'
TIME
AUTO
MODE
CUE
TRACK SEARCH
IN/REALTIME CUE
OUT/EXIT
4
¢
SEARCH
OUT ADJUST
1
¡
CUE
CUE
PLAY/PAUSE
REV
6
4
PLAY/PAUSE

UTILISATION DU LECTEUR DJ

CDJ-500S
COMPACT DISC PLAYER
TEMPO
10/ 16
EJECT
MASTER
TEMPO
EJECT
1
RELOOP
0
LOOP
TEMPO
+
FWD
2,3
Opérations de lecture avec la fonction
Attaque Automatique en service
On trouvera ici les opérations de base quand la fonction
d'attaque automatique est activée (l'indicateur AUTO CUE
est allumé sur l'affichage).
1. Appuyer sur la touche EJECT (0).
2. Placer un disque dans l'appareil.
÷ Poser le disque bien au centre du plateau en dirigeant
son étiquette vers le haut.
÷ Dans le cas d'un disque de 8 cm, le poser dans la
cavité exactement au centre du plateau.
÷ Ne jamais placer plusieurs disques à la fois.
3. Pousser sur l'avant du volet du logement pour
le refermer.
4. Appuyer sur la touche PLAY/PAUSE (6).
÷ Appuyer sur cette touche uniquement après que
l'indicateur CUE s'est allumé. La lecture commence
immédiatement.
7 A la fin de la lecture d'une plage, l'appareil passe au
début de la suivante et il s'y place en mode d'attente.
L'indicateur CUE s'allume tandis que l'indicateur 6
clignote pour signaler que l'appareil se trouve en mode
d'attente de lecture. Quand la touche PLAY/PAUSE (6)
est alors actionnée, la lecture de la plage localisée com-
mence immédiatement.

Recherche par images

7 Molette pas-à-pas.
Pendant la lecture, appuyer sur la touche PLAY/PAUSE
(6) pour passer au mode d'attente, puis tourner la
molette pour effecteur la recherche par image.
÷ La recherche s'accomplit par paliers d'une image par
rotation de la molette.
÷ Lorsque la molette est tournée dans le sens horaire,
la recherche s'accomplit vers l'avant; elle s'accomplit
vers l'arrière quand la molette est tournée dans le
sens anti-horaire.
÷ Si la molette est tournée à une vitesse d'environ une
rotation par seconde, le son normal de la lecture sera
audible (75 images = 1 seconde).

Advertisement

loading