Error Message Display; Cleaning The Jog Dial - Pioneer CDJ-1000 Operating Instructions Manual

Error message display

When the CDJ-1000 CD player is unable to operate properly, an error code is dis-
played on the display panel. Check the error code displayed against the following
table and take the recommended action to correct the error. If an error code other
than any of the error codes listed in the table below is displayed or if the same error
code is displayed even after corrective action has been taken, contact your nearest
Pioneer Service Station or contact the store from which you purchased your player
for assistance.
Error Code Error Type
E-72 01 TOC READ ERROR
E-83 01 PLAYER ERROR
E-83 02
E-83 03
E-91 01
MECHANICAL TIME OUT

Cleaning the Jog Dial

To clean the PLAYER wipe with a polishing or a soft, dry cloth. For stubborn dirt,
moisten a soft cloth with a weak solution of neutral detergent (diluted in five to six
parts water), wring the cloth well, and wipe away the dirt. Use a dry cloth to wipe
the surface dry. Applying alcohol, paint thinner, benzene, insecticides, or other
stringent substances to the Jog dial may cause the markings or finishing of the dial
to peel or become discolored, and the use of any such substances should accord-
ingly be avoided.
Should this product require service in the U.S.A. and you
wish to locate the nearest Pioneer Authorized Independent
Service Company, or if you wish to purchase replacement
parts, operating instructions, service manuals, or
accessories, please call the number shown below.
800 – 872 – 4159
Please do not ship your product to Pioneer without first
calling the Customer Service Department at the above
listed number for assistance.
Pioneer Electronics Service, Inc.
Customer Service Department
P.O. BOX 1760, Long Beach,
CA 90801-1760, U.S.A.
For warranty information please see the Limited Warranty
sheet included with your product.
Description
Player unable to read TOC data.
Disc is rotating, but rotation cannot be ascertained.
Player unable to play back currently inserted disc.
Mechanical operation has failed to complete within
specified time interval.
OTHERS: TROUBLESHOOTING
Possible cause and recommended action
Disc is cracked.
= Recommended action: replace disc.
Disc is soiled or dirty.
= Recommended action: clean disc.
Dust or some other form of foreign particles have found their
way into disc insertion slot.
= Recommended action: remove dust or other foreign par-
ticles.
Should this product require service in Canada, please con-
tact a Pioneer Canadian Authorized Dealer to locate the
nearest Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Service Depart-
ment at the following address:
Pioneer Electronics of Canada, Inc.
Customer Satisfaction Department
300 Allstate Parkway
Markham, Ontario L3R 0P2
(905) 479-4411
1 (877) 283-5901
For warranty information please see the Limited
Warranty sheet included with your product.
19
<DRB1297>
En