Switching The Rds Display; Selecting Alternative Frequencies; Using Pi Seek - Pioneer KEH-P6020R Operation Manual

Section
RDS
04

Switching the RDS display

When you tune in a RDS station its program
service name is displayed. If you want to know
the frequency you can.
Press .
DISPLAY
Press
DISPLAY
the following settings:
Program service name—PTY information—
Frequency
PTY (program type ID code) information is listed
on page 17.
• PTY information and the frequency of the
current station appears on the display for eight
seconds.
• If a PTY code of zero is received from a station,
is displayed. This indicates that the sta-
NONE
tion has not defined its program contents.
• If the signal is too weak for this unit to pick up
the PTY code,
NO PTY

Selecting alternative frequencies

If you are listening to a broadcast and the recep-
tion becomes weak or there are other problems,
the unit will automatically search for a different
station in the same network which is broadcast-
ing a stronger signal.
• AF is on as a default.
1 Press
FUNCTION
Press
FUNCTION
play.
2 Press 5 to turn
Press 5 and
AF :ON
3 Press ∞ to turn
Press ∞ and
AF :OFF
14
En
repeatedly to switch between
is displayed.
to select
AF.
until appears in the dis-
AF
on.
AF
is displayed.
off.
AF
is displayed.
Notes
• Only RDS stations are tuned in during seek
tuning or BSM when
• When you recall a preset station, the tuner
may update the preset station with a new
frequency from the station's AF list. (This is
only available when using presets on the
band.) No preset number appears on the
F2
display if the RDS data for the station received
differs from that for the originally stored sta-
tion.
• Sound may be temporarily interrupted by
another program during a AF frequency
search.
• When the tuner is tuned to a non-RDS station
the indicator flashes.
AF
• AF can be switched on or off independently
for each FM band.

Using PI seek

If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station with
the same programming. During the search,
is displayed and the output is muted. The
SEEK
muting is discontinued after completion of the
PI seek, whether or not a different station is
found.
is on.
AF
F1
PI
or