Controls Overview (Fig.b); Getting Started; Installing Filters - Philips AC2887 User Manual

Controls overview (fig.b)
For AC2887
H On/Off button
I
Light dimming button
J Auto mode button
K Display screen
L
General mode icon
M Allergen mode icon
N Bacteria&Virus mode icon
O
Fan speed button
P Timer button
Q Reset button
For AC2882
H
On/Off button
I Auto mode button
J
Display screen
K
General mode icon
L Allergen mode icon
M
Bacteria&Virus mode icon
N
Fan speed button
O Reset button
3

Getting started

Installing filters
Note
• Make sure the air purifier is unplugged from
the electrical outlet before installing the filters.
• Make sure the side of the filter with the tag is
pointing towards you.
1
Remove all packaging materials of the air
purification filters (fig.c).
2
Pull the bottom part of the front panel to
remove it from the appliance (fig.d).
3
Press the two clips down and pull the pre-
filter towards you (fig.e).
4
Put the unpacked air purification filters
back into the appliance (fig.f).
5
Attach the pre-filter back into the
appliance (fig.g).
Note
• Make sure that the side with the two clips is
pointing towards you, and that all hooks of the
pre-filter are properly attached to the purifier.
6
Reattach the front panel by pressig the
top part of the panel onto the top of the
air purifier (1). Then, gently push the panel
against the body of the air purifier (2)
(fig.h).
7
Wash your hands thoroughly after installing
filters.
EN 5