Tape Copying - Pioneer CT-W208R Operating Instructions Manual

Stereo double cassette deck
Hide thumbs Also See for CT-W208R:
Table of Contents

Advertisement

TAPE COPYING (from DECK I to DECK II)
4
Ωı¿ˆ<?˘B
Î
STEREO DOUBLE CASSETTE DECK
DECK I
+
MS
3
COPY I
II
NORMAL
HIGH
DOLBY NR
B
AUTO REVERSE
Auto Tape Selector
MUSIC SEARCH SYSTEM / PLAYBACK
POWER
DECK @
I
— OFF _ ON
1
÷ The tape copying function permits you to copy
the contents of a tape from DECK I to Deck II.
÷ The SYNCHRO COPY button is used to select ei-
ther normal speed copying, or high-speed copy-
ing (copying at twice the normal playback speed).
1. Load a tape for playback into DECK l and a tape
for recording into Deck II.
2. Set the REV MODE switch.
3. Set the tape transport direction.
÷ Tape copying is always performed in the direc-
tion indicated by the tape transport indicator
(
or
). To change this direction, press the
desired playback button (3 or 2), then imme-
diately press the stop (7) button.
4. Press the SYNCHRO COPY button to select either
NORMAL or HIGH speed.
NORMAL : Tape copying at normal speed allows
listen during playback (COPY indica-
tor lights steadily).
HIGH :
Tape copying at double speed (COPY
indicator flashes). Playback will still
audible.
2
DECK
@
II
+
MS
DECK II
REV MODE
OFF
C
RELAY/SKIP
AUTO REVERSE
Auto Tape Selector
MUSIC SEARCH SYSTEM / PLAYBACK
REC
LEVEL
HIGH SPEED
COPY SYSYEM
DECK @
II
MIN
MAX
DOLBY B-C NR
1
To stop copying
Press the stop (7) button of either deck. Both decks
will stop.
NOTES:
÷ The tape in DECK lI will be copied in the same
type of DOLBY NR (B/C) as DECK l's tape, regard-
less of its own setting. When listening to the cop-
ied tape, set the DOLBY NR (B/C) to the type
used for recording.
÷ If a nearby television set is on while high-speed copy-
ing is being performed, a high-pitched interference
sound may be heard on the tape. In this case, either
use the normal speed copying function, or turn off
the television.
÷ During high-speed copying, none of the operation
buttons will function except for the stop ( 7 ) button.
÷ During normal speed copying, the recording mute ( • )
and pause ( 8 )buttons of deck II also function.
÷ Tape copying is cancelled when either of the two
tapes reaches the end. Therefore it is advisable to
use tapes of the same length.
÷ The sound quality of the copied tape will be some-
what less than the original. Therefore when making
more than one copy, always record from the original
tape (do not make a copy of a copy).
÷ The recording level adjustment is not necessary dur-
ing tape copying.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents