Table of Contents
Advertisement
Quick Links
1. Package Contents
1 x DP-502 unit
1 x power supply
1 x Ethernet cable
1 x audio patch cord, monoral 3.5mm to 3.5mm
1 x audio patch cord, monoral 3.5mm to RCA
1 x software CD
1 x user's manual
Please contact your dealer immediately should any item be missing.
DP-502
Networked Onhold Player
User's Manual
(c) 2014 - 2016 Eletech Enterprise Co., Ltd.
All Rights Reserved
- 1 -
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eletech DP-502
Summary of Contents for Eletech DP-502
- Page 1 1 x audio patch cord, monoral 3.5mm to RCA 1 x software CD 1 x user’s manual Please contact your dealer immediately should any item be missing. DP-502 Networked Onhold Player User’s Manual (c) 2014 - 2016 Eletech Enterprise Co., Ltd. All Rights Reserved - 1 -...
-
Page 2: Hardware Installation
2. Introduction 3. Hardware Installation DP-502 is a music on hold player capable of playing WAV and MP3 files via a MOH ready phone system to callers on hold. In addition to superior sound quality the device also offers remote content updating via the Internet, making it ideal for installations where central management is appreciated and/or mandated. -
Page 3: Software Installation
DP502 Sever Program & DP502 Console Program it needs to be up and running only when new updates are available for the devices Run “DP-502 Setup.exe” on the software CD and install the software on a Windows to download. PC that is to be the server. The following programs will be installed: the DP502 Server Program and the DP502 Console Program. -
Page 4: Device Configuration
6. Device Configuration The device needs to be correctly configured in order to operate properly. The configuration must be done on a PC (not necessarily the server) connected to the same LAN as the target device. By using a web browser there are two ways to configure the device: If you know the device’s IP address (by looking up the DHCP device table), you may enter it into the browser (e.g. - Page 5 7. The Server Program 8. The Console Program The Server Program needs to be running in order for the devices to connect with The Console Program is used to manage devices and program SD cards with initial the server. For convenience’s sake it is made to start running automatically when system configuration data such as server IP and sound files.
- Page 6 Group Configuration Device Configuration Highlight the target group for configuration. Highlight the target device for configuration. Uncheck the Use Default box before making changes. Server IP & Server Port Unchangeable in this part of the program. In the example above, the Connect Time and the Generic have been changed from the group default.
Need help?
Do you have a question about the DP-502 and is the answer not in the manual?
Questions and answers