Protecting Your Unit From Theft; Removing The Front Panel; Attaching The Front Panel - Pioneer AVIC-N1 Hardware Manual

• Press PGM button and hold to turn BSM
on when selecting RADIO as the source.
Press PGM button and hold until the BSM
turns on.
To cancel the storage process, press PGM
button again.
• Press PGM button and hold to turn BSSM
on when selecting TV as the source.
Press PGM and hold until the BSSM turns
on.
To cancel the storage process, press PGM
button again.
• Press PGM button to select the desired
channel select setting when selecting XM
as the source.
Press PGM button repeatedly to switch
between the following channel select settings:
CH NUMBER (channel number select set-
ting) — CATEGORY (channel category
select setting)

Protecting your unit from theft

The front panel can be detached from the display
unit to discourage theft, as described below.
Important:
• Never use force or grip the display and the but-
tons tightly when removing or attaching.
• Avoid subjecting the front panel to excessive
shocks.
• Keep the front panel out of direct sunlight and
high temperatures.
• After detached the front panel, keep it in the
safe place not to result in scratching or dam-
age.
• Attach the front panel while driving, or else
may result in scratching or damage.

Removing the front panel

1
Press DETACH button to remove the front
panel.
2
Gently grip the right side of the front
panel and slowly pull it outward.
Take care not to drop the front panel and pro-
tect it from contact with water or other fluids
to prevent permanent damage.

Attaching the front panel

• Replace the front panel by holding it
upright to this unit and clipping it
securely into the mounting hooks.
17