Setting Digital And Analog Audio Output (Out Selection) - Pioneer XDV-P9 Owner's Manual

Setting Digital and Analog Audio Output (OUT SELECTION)

You can set linear PCM audio output for both digital and analog output. Set audio output cor-
rectly to match the components you are using with this unit.
Precaution:
• If the setting is incorrect there will be no sound so be sure to read the manuals of the con-
nected components.
Move the joystick up/down to select the
1
"OUT SELECTION".
"OUT SELECTION" is indicated in blue. (For
details, see page 40.)
Press the ENTER button.
2
Audio output settings are indicated on the right of
the screen.
Move the joystick up/down to select the
3
desired audio output setting.
The currently set audio output setting is indicated in
yellow. The audio output setting selected with the
joystick is indicated in blue.
Output setting
48kHz
96kHz
Press the ENTER button.
4
The selected audio output setting is set.
Note:
• With discs featuring 96 kHz recording, if you select the "96kHz" setting, audio is not output
from digital output.
• When using this unit with a Multi-Channel AV Master Unit (e.g. AVM-P9000R, AVM-
P9000), select the "48kHz" setting. If you select the "96kHz" setting, no sound will be output
when playing discs featuring 96 kHz recordings.
• Pressing the RETURN button takes you back to the previous display.
49
Setting detail
Select this setting when using digital connections.
A 48 kHz signal is output regardless of the audio sampling frequency.
A 96 kHz signal is converted to a 48 kHz signal. (Initial setting)
Select this setting when using analog connections.
The signal is output with the same frequency as the audio sampling frequen-
cy. With a 96 kHz signal, you can enjoy exceptionally high sound quality.