Basic Operations - Pioneer SUPER TUNER 3D DEH-22UB Owner's Manual

Operating this unit
An upper tier of folder or menu
5
c
exists.
6
(folder) The list function is operated.
A lower tier of folder or menu ex-
7
d
ists.
8
LOC The local seek tuning is on.
LOUD
9
The loudness is on.
(loudness)
The selected frequency is being
a
5 (stereo)
broadcasted in stereo.
b
(repeat) Track or folder repeat is on.
(ran-
c
Random play is on.
dom)
The sound retriever function is
d
(sound re-
on.
triever)

Basic Operations

Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight and
high temperatures.
! Remove any cables and devices attached to
this unit before detaching the front panel to
avoid damage to the device or vehicle interior.
Removing the front panel to protect your unit from
theft
1 Press the detach button to release the front
panel.
2 Grab the front panel and remove.
Re-attaching the front panel
1 Slide the front panel to the left until it clicks.
Front panel and the head unit are connected on
the left side. Make sure that the front panel has
been properly connected to the head unit.
2 Press the right side of the front panel until it is
firmly seated.
If you can't attach the front panel to the head unit
successfully, try again. However, forcing the front
panel into place may result in damage.
Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press SRC/OFF and hold until the unit turns off.
Selecting a source
1 Press SRC/OFF to cycle between:
TUNER (tuner)—CD (built-in CD player)—USB
(USB)—AUX (AUX)
Adjusting the volume
1 Turn M.C. to adjust volume.
Note
When this unit's blue/white lead is connected to
the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's
source is turned on. To retract the antenna, turn
the source off.
Section
01
5
En