Manually Installing The Monitor Driver; Installing The Monitor Driver In Windows 7 - Lenovo L27q-10 User Manual

Table of Contents

Advertisement

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7, Windows
10.

Installing the monitor driver in Windows 7

To use the Plug and Play feature in Microsoft Windows 7, do the following:
1. Turn off the computer, all attached devices.
2.
Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
4.
From the Lenovo website http://www.lenovo.com/support/L27q_10, find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop).
Open the Display Properties window by clicking Start, Control Panel, Hardware and
5.
Sound icon, and then click the Display icon.
Click the Change the display settings tab.
6.
Click the Advanced Settings icon.
7.
Click the Monitor tab.
8.
Click the Properties button.
9.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 7
(where X indicates Āthe folder in which the downloaded driver is locatedā(such as a
desktop)).
14. Select the Ālenl27q-10.infā file and click the Open button. Click the OK button.
15. In the new window, select LEN L27q-10 and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
3-5
Chapter 3.

Advertisement

Table of Contents
loading

Table of Contents