Download  Print this page

Adjusting The Time Alignment; Using Subwoofer Output - Pioneer DEH-P9800BT Operation Manual

High power dsp cd/mp3/wma/aac player with bluetooth wireless technology, rds tuner and multicd control.
Hide thumbs

Advertisement

Audio Adjustments

Adjusting the time alignment

You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in Custom.
1
Use MULTI-CONTROL to select
TA Mode.
TA Mode appears in the display.
2
Press MULTI-CONTROL to select a unit
of distance.
Each press of MULTI-CONTROL selects the
unit of distance in the following order:
cm (centimeter)—inch (inch)
3
Use MULTI-CONTROL to select
Time Alignment.
Time Alignment appears in the display.
# Can't adjust TA. Set position FL/FR appears
when neither Front Left nor Front Right is se-
lected in the position selector mode (Position).
# When selecting OFF in TA Mode, you cannot
switch to Time Alignment.
4
Push MULTI-CONTROL left or right to
select the speaker to be adjusted.
Each time MULTI-CONTROL is pushed left or
right, the speaker is selected in the following
order:
1 Front speaker left
2 Front speaker right
3 Rear speaker right
4 Subwoofer right
5 Subwoofer left
6 Rear speaker left
1 1 1 1
2 2 2 2
6 6 6
5 5 5
4 4 4
3 3 3
Front speaker left—Front speaker right—Rear
speaker right—Rear speaker left—Subwoofer
left—Subwoofer right
# You cannot select subwoofer left and subwoo-
fer right when the subwoofer output is off.
5
Push MULTI-CONTROL up or down to
adjust the distance between the selected
speaker and the listening position.
Each time MULTI-CONTROL is pushed up or
down, the distance increases or decreases.
400.00cm to 0.00cm is displayed as the dis-
tance is increased or decreased, if you have
selected centimeters (cm).
160.0inch to 0.0inch is displayed as the dis-
tance is increased or decreased, if you have
selected inches (inch).
# You can adjust the distance for the other
speakers in the same way.
6
Press BAND to cancel the time align-
ment mode.

Using subwoofer output

This unit is equipped with a subwoofer output
which can be turned on or off. When a sub-
woofer is connected to this unit, turn the sub-
woofer output on.
The subwoofer output phase can be switched
between normal and reverse.
1
Use MULTI-CONTROL to select
Subwoofer1.
Subwoofer1 appears in the display.
2
Press MULTI-CONTROL to turn subwoo-
fer output on.
ON appears in the display. Subwoofer output
is now on.
# To turn subwoofer output off, press
MULTI-CONTROL again.
Section
14
83
En

Advertisement

Chapters

Table of Contents

   Related Manuals for Pioneer DEH-P9800BT

Comments to this Manuals

Symbols: 0
Latest comments: