Table of Contents
Advertisement
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Select Version to display the projector's firmware version. Select Projector Info to display the settings
described below.
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Information item
Lamp Hours
Source
Input Signal
Resolution
Video Signal
Description
Displays the number of hours (H) the lamp has been used in
Normal and ECO Power Consumption modes; if the information is
displayed in yellow, obtain a genuine Epson replacement lamp
soon
Displays the name of the port to which the current input source is
connected
Displays the input signal setting of the current input source
Displays the resolution of the current input source
Displays the video signal format of the current input source
148
Advertisement
Table of Contents
