Displaying Disc Titles; Using Cd Text Functions; Displaying Text Information On Cd Text Discs; Scrolling Text Information In The Display - Pioneer DEH-P88RS Operation Manual

Built-in CD Player

Displaying disc titles

You can display the text information of any
disc that has had a disc title entered.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play time— : disc title and play time

Using CD TEXT functions

Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artist's name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
Displaying text information on
CD TEXT discs
You can display the text information of any
disc that has had a disc title entered.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play time— : disc title and play time— :
disc artist name and play time— : track title
and play time— : track artist name and play
time— : disc title and
— : track title and
# If specific information has not been recorded
on a CD TEXT disc, title or name is not displayed.
Scrolling text information in
the display
This unit can display the first 14 letters of disc
title, disc artist name, track title and track ar-
: disc artist name
: track artist name
tist name. When the text information is longer
than 14 letters, you can scroll the text informa-
tion as follows.
% Press DISPLAY and hold until the text
information begins to scroll through the
display.
Note
When Ever Scroll is set to ON at the initial setting,
CD text information scrolls continuously in the
display. If you want to display the first 14 charac-
ters of text information temporarily and scroll
from the beginning, press and hold DISPLAY.
Refer to Switching the Ever Scroll on page 74.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
1 Turn MULTI-CONTROL to switch to the
track title list mode.
# You can also perform this operation by press-
ing joystick on the remote control.
2 Use MULTI-CONTROL to select the de-
sired track title.
Turn to change the track title; press to play.
# You can also change the track title by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the track title list mode is canceled
automatically.
Section
06
29
En