Disconnecting A Cellular Phone; Registering Connected Cellular Phone; Deleting A Registered Phone - Pioneer DEH-P7850BT Operation Manual

Bluetooth Telephone
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 80.

Disconnecting a cellular phone

When you are done using your phone with this
unit, you can close the Bluetooth wireless con-
nection.
1 Use MULTI-CONTROL to select
Disconnect phone in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After the disconnection is completed,
Disconnected is displayed.
Registering connected
cellular phone
You can register a phone that is temporarily
connected to this unit in order to take full ad-
vantage of the features available with Blue-
tooth wireless technology. A total of five
phones can be registered: three user cellular
phones and two guest phones. When regis-
tered as a user phone, all the possible func-
tions are available for use. When registered as
a guest phone, some functions are limited.
1 Use MULTI-CONTROL to select
Set phone in the function menu.
Set phone appears in the display.
Black plate (37,1)
2 Push MULTI-CONTROL up or down to
select a registration assignment.
Each time MULTI-CONTROL is pushed up or
down, the registration assignment is switched
in the following order:
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# As you select each assignment, you can see
whether or not a phone is already registered
there. If the assignment is empty, No data is dis-
played. If the assignment is already taken, the de-
vice name appears. If you want to replace an
assignment with a new phone, first delete the
current assignment. For more detailed instruc-
tions, see Deleting a registered phone on this
page.
# If you need to know the BD (Bluetooth Device)
address of the phone, push MULTI-CONTROL left
here.
3 Press MULTI-CONTROL to register the
cellular phone to this unit.
When the registration is completed,
Reg. Completed is displayed.
# If the registration failed, Reg. ERROR is dis-
played. In this case, return to step 1 and try
again.

Deleting a registered phone

If you no longer need to use a registered
phone with this unit, you can delete it from the
registration assignment for another phone.
1 Use MULTI-CONTROL to select
Delete phone in the function menu.
Delete phone appears in the display.
<CRD4060-A/N>37
Section
07
37
En