Troubleshooting; Error Messages; Usb Storage Device; Additional Information - Pioneer DEH-2200UB Owner's Manual

Appendix

Additional Information

Troubleshooting

Symptom Cause
The display You did not per-
automatically form any opera-
returns to the tion within about
ordinary dis- 30 seconds.
play.
The repeat play Depending on
range changes the repeat play
unexpectedly. range, the se-
lected range may
change when se-
lecting another
folder or track, or
when fast for-
warding/rever-
sing.
A subfolder is Subfolders can-
not played not be played
when FOLDER
back.
(folder repeat) is
selected.
NO XXXX ap- No text informa-
pears when a tion embedded
display is chan-
ged (e.g., NO
TITLE).
The display is Demo mode is
illuminated on.
when the unit
is turned off.
The unit is mal- You are using a
functioning. device, such as a
There is inter- cell phone, that
ference. transmits electro-
magnetic waves
near the unit.

Error messages

When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
18
En
Action
Perform operation
again.
Select the repeat
play range again.
Select another re-
peat play range.
Switch the display
or play another
track/file.
Press DISP/
/
SCRL to cancel
demo mode.
Move electrical de-
vices that may be
causing the inter-
ference away from
the unit.
Built-in CD Player
Message Cause
ERROR-11, 12,
Dirty disc
17, 30
Scratched disc
ERROR-10, 11, Electrical or me-
12, 15, 17, 30,
chanical
A0
ERROR-15 The inserted disc
is blank
ERROR-22, 23 Unsupported CD
format
FRMT READ
There is some-
times a delay be-
tween the start of
playback and
when you start to
hear any sound
NO AUDIO The inserted disc
does not contain
any playable files
SKIPPED The inserted disc
contains DRM
protected WMA
files
PROTECT
All the files on
the inserted disc
are embedded
with DRM

USB storage device

Message Cause
NO DEVICE
When plug and
play is off, no
USB storage de-
vice is con-
nected.
FRMT READ There is some-
times a delay be-
tween the start of
playback and
when you start to
hear any sound
Action
Clean disc.
Replace disc.
Turn the ignition
switch OFF and
back ON, or switch
to a different
source, then back
to the CD player.
Replace disc.
Replace disc.
Wait until the mes-
sage disappears
and you hear
sound.
Replace disc.
Replace disc.
Replace disc.
Action
! Turn the plug
and play on.
! Connect a com-
patible USB sto-
rage device.
Wait until the mes-
sage disappears
and you hear
sound.