4-2. SERVICE INSPECTION MODE
Press the 'Auto' + 'Delicate' + 'Power' buttons at the same time for two seconds to enter Service Inspection Mode.
You can change the mode by pressing the Normal button again. To advance to the next mode, press the normal button.
If you want to activate a mode while operating the dishwasher, the door must be closed.
If 'LE' , 'OE', 'tE' error occur, enter Service Inspection Mode after resolving it.
Service Inspection Mode is described in the following table.
Entering Test Mode
Changing the mode
Displaying the program
All Led Display →
"dE" error occurs.
A nozzle does not
→ n1 → n2 → n3 → n4 → n5 → n6 → n7 → n8 → n9 → nA
→ the "Middle up" runs for 1 minutes, change the order of operation.