Location - Haier HRF-656FF/A Operation Manual

English
The appliance should be placed on a fl at and
solid surface. If the appliance is placed on a
plinth, fl at, strong and fi re-resistant materials
must be used. The front foot of the appliance
can be adjusted clockwise or anti-clockwise
to lift or lower the appliance if it is placed on
an uneven surface.
The refrigerator shall be placed away from
heat sources or direct sunlight.
Never place the refrigerator near to a water
source. Clean and dry any water splashes and
stains with soft cloth.

Location

Door adjustment
If freezer door below refrigerator's Apply
a spanner on the slot of left screw, turn as
directed by the arrow until the freezer door
reaches the same height of refrigerator door.
Spanner
If freezer door above refrigerator's
Apply a spanner on the slot of right screw,
turn as directed by the arrow until the freezer
door reaches the same height of refrigerator
door.
Height difference
The appliance should be placed in a well-
ventilated area, and a space of 10cm or more
should be allowed around the refrigerator.
If the appliance is built in the wall, at least
25cm and 5cm gap must be kept above and
around the refrigerator, respectively.
8 - EN
Height difference
Height difference
Left screw
Height difference
Spanner
Right screw
Space