Table of Contents
Advertisement
4.
Run the USB cable for the display through the hole on the
side of the pole (close to the display), exiting through the
bottom or side of the pole (depending on the installation).
To install the display:
Note: Depending on your system, the driver for the display may
need to be installed from the CD provided with it.
1.
Attach the USB cable located to the display. Use the strain
relief on the back of the display to hold the cable in position.
2.
Pull open the side of the display holder, insert the display,
then slide the open side of the holder back into place over
the display.
12
Advertisement
Table of Contents
