Pioneer BONUS VIEW BDP-51FD Operating Instructions Manual page 54

Problem
07
No picture is displayed.
Pictures do not display
properly on the TV.
No sound is produced.
HDMI Control function does
not work.
54
En
Check
Is the HDMI indicator lit?
Are the terminals for outputting video signals properly set?
Is the resolution properly set?
Is the HDMI cable properly connected?
Is a DVI device connected?
Is the HDMI cable damaged?
Are you watching the picture with the TV connected via an
HDMI cable?
Is a DVI device connected?
Is the HDMI cable properly connected?
Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The HDMI Control function
Are you connected to the TV using an HDMI cable to watch the
picture?
Is HDMI Control set to On on the player?
Does the connected device support the HDMI Control
function?
Is HDMI Control set to On on the connected device?
Are multiple players connected?
Remedy
• If the HDMI indicator is not lit, read the HDMI device's
operating instructions and switch to the proper input.
• If the HDMI indicator is lit, use OUTPUT RESOLUTION to
switch the output video resolution (page 25).
Press VIDEO SELECT to switch the HDMI OUT terminal.
Depending on the output video resolution setting, the picture
may not be output. Use OUTPUT RESOLUTION to switch the
output video resolution (page 25).
• Insert the cable firmly and all the way in.
• With some cables, 1080p video signals cannot be properly
output.
The picture may not be displayed properly if a DVI device is
connected.
If the cable is damaged, replace it with a new one.
Change the HDMI Color Space setting (page 41).
If video signals are being output from a terminal other than the
HDMI terminal, no audio signals are output from the HDMI
terminal. Connect to the TV using an HDMI cable and press
VIDEO SELECT to switch to the HDMI output terminal (pages
14, 17 and 24).
The sound will not be output from the HDMI OUT terminal if a
DVI device is connected. Connect the device to a DIGITAL OUT
(OPTICAL/COAXIAL) terminal or the AUDIO OUT (2 ch)
terminals.
Connect the HDMI cable properly.
may not work properly if HDMI cable other than a High Speed
HDMI™ cable is used.
If video signals are being output from a terminal other than the
HDMI terminal, HDMI Control function does not work.
Connect to the TV using an HDMI cable and press VIDEO
SELECT to switch to the HDMI output terminal (pages 14, 17
and 24).
Set HDMI Control to On on the player (page 41).
• The HDMI Control function will not work with devices
manufactured by companies other than Pioneer, even when
connected using an HDMI cable.
• The HDMI Control function will not work if devices that do not
support the HDMI Control function or devices manufactured
by companies other than Pioneer are connected between the
HDMI Control-compatible device and the player.
• The HDMI Control function may not work with certain Flat
Panel TVs.
Also refer to the operating instructions of the connected
device.
Set HDMI Control to On on the connected device. The HDMI
Control function works when HDMI Control is set to On for all
the devices connected by HDMI cable.
Once connections and settings of all the devices are finished,
be sure to check that the player's picture is output to the Flat
Panel TV. (Also check after changing the connected devices
and connecting and/or disconnecting HDMI cables.) If the
player's picture is not being output to the Flat Panel TV, the
HDMI Control function may not work properly.
For details, refer to the operating instructions of the connected
device.
The HDMI Control function may not work if three or more
players, including this player, are connected by HDMI cable.