Download  Print this page

Valve Clearance Adjustment - Kawasaki NINJA ZX-10 Service Manual

Hide thumbs

Advertisement

4-14 ENGINE TOP END
●Torque the cylinder head bolts following the tightening
sequence
oTighten them first t0 20 N-m (2.0 kg-m,14.5 ft-lb),
and then tighten them to the specified torque (see Ex'
plodedView).
Front
≪ 二]
輿
回に く ヨ
回 くヨ
0
1 ⑨
0
1
●Tighten the cylinder bolts and cylinder head bolt
(6mm)to the specified torque (see ExplodedView).
・ ● 鐘● 鐘・ 暮 ●・ 寸 鐘 鐘 ● ● ● ● ● ● ● I
眼 l V a l v e s
s ● 働 a ・ 暉 ● ● ● 畠 l i
● ● ● ● a
● l l l s l l
●畠 畠 鋤 自● l
●・ I
寧 ● ● 畠 ● 嘸 I
●・ ●・ ● ● 嶮・ S
● I
● 畠 ● ●
● s ・ ● ● ● ● l
● ●・ 暉 曇 a
● ● ● ● l
Valve Clearance Adjustment
NOTE
oValve clearance must be checked and adjusted when
the en
がneisc01d(at room temperature
ノ.
Falrlng
Coolant(Drain)
FuelTank
Cooling Hose
Ba 汗le Plate
Pickup Coil Cover
Cylinder Head Cover
●Using a thickness gauge, measure the valve clearance
between the rocker arm and the shim.
0When positionin9#4 piston TDC at the end of the
compression stroke:
inlet vaIve clearance of
孝2and#4 cylinders
e χhaust valve clearance of
毒3 and
毒4 cylinders
MeasuringValves
EX
IN
#1
#2
①①
oWhen positioning#l piston TDC at the end of the
compression stroke:
inlet valve clearance of#l and#3 cylinders
e χhaust valve clearance of
毒l and
毒2 cylinders
MeasuringValves
Valve Clearance
Standard:
IN.
Eχ.
#3
弁4
0.13 - 0.19 mm
0.18 - 0.24 mm
★lf the valve clearance is not within the specified range
j
adjust the valve clearince.
●Adjust the valve clearance,as follows
NOTE
oTo select a new shim wllich brings valve cleanlnce
│/1/7 が?yj ・l t 力 ∂
聊 良; が た∂t/0rtpe/
・yocy./?
∂yigr ro
が?∂
χ/ ∂/ 比
Cjearance Adjustment charts.

Advertisement

Table of Contents

This manual is also suitable for:

Zx-10

Comments to this Manuals

Symbols: 0
Latest comments: