Powr-Flite C1600 Operator's Manual

Powr-Flite C1600 Operator's Manual

High speed burnisher

Advertisement

Quick Links

Operator's Manual
High Speed Burnishers
1600 RPM
Model C1600
A Tacony Company
Fort Worth, Texas 76140
X9330 12/2006 © Powr-Flite, All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C1600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Powr-Flite C1600

  • Page 1 Operator’s Manual High Speed Burnishers 1600 RPM Model C1600 A Tacony Company Fort Worth, Texas 76140 X9330 12/2006 © Powr-Flite, All Rights Reserved...
  • Page 2: Safety Instructions

    Your new High Speed Burnisher will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior to packaging, your High Speed Burnisher was inspected by a Quality Control Technician. WARNINGS READ THIS OPERATOR’S MANUAL! WARNING: You must have training in the operation of this machine before using. WARNING: Machines can burn flammable materials and vapors.
  • Page 3: Important Safeguards

    INSTRUCTIONS Application The C1600 High Speed Burnisher is used to achieve and/or maintain a high gloss appearance on an established floor finish. The high pad revolution of the floor burnisher combined with a good polishing pad will turn properly established cleaned floor finish into a high gloss, hardened finish known as the “wet look shine”.
  • Page 4: How To Operate The Machine

    (Fig 5) Switch MAINTENANCE Trigger • Once a month, remove the motor cover of the unplugged C1600 by removing the motor Fig 4 cover screws. • Vacuum out any dust or debris which has accumulated in the motor. (Fig 6) •...
  • Page 5: Troubleshooting

    • Do not operate with handle set too high. Recommended handle height is from your waist with your arms extended forward. Prevent circuit overload. • Do not spray buff with the C1600. Apply a restorer, such as Powr-Flite’s Escalate, allow to dry, then burnish. • Check pad and change if dirty or rough.
  • Page 7 Switch Box Cover, Metal Handle X9050 Spring Classic 2 Speed X8923 Insulation Sheet, 2.5x2.0X0.15, Handle Assembly X8037-1C C1200 C1600 C2000 Motor w/ Plug 7CY001 Washer, #10 INT Tooth Lock SS X8106 spacer, motor cover, metal X8207 Screw 10-24 x 1/2, PHIL PAN Type F Zinc...
  • Page 8 When using an electrical appliance, basic safety precautions should always be followed. WARNING TO AVOID FIRE, DO NOT USE WITH A FLAMMABLE OR COMBUSTIBLE LIQUID TO CLEAN FLOOR. A Tacony Company Fort Worth, Texas 76140 800.880.2913 X9330 12/2006 © Powr-Flite, All Rights Reserved...

Table of Contents