Firmware Restoration; Using A Hub - Asus WL-300g User Manual

Spacelink 802.11g access point

Hide thumbs Also See for WL-300g:

Table of Contents

Chapter 3 - Home Gateway Utilities

Firmware Restoration

This utility will automatically search out failed SpaceLink 802.11g APs

and upload a firmware that you specify. The process takes about 3 to 4

minutes and during this process the PWR, AIR, and WLAN LEDs will

remain lit while the LAN LED will flash slowly.

The Firmware Restoration utility is an emergency rescue tool to restore a

SpaceLink 802.11g AP which has failed during a previous firmware upload.

A failed firmware upgrade will cause the SpaceLink 802.11g AP to enter a

failure mode, waiting for the user to use the Firmware Restoration utility to

find and upload a new firmware. This is not a firmware upgrade utility and

cannot be used on a working SpaceLink 802.11g AP. Normal firmware

upgrades must be done through the web manager.

If you have problems upload a firmware while using a network hub, try

connecting your computer directly to the LAN port. Either 10Base-T or

100Base-TX connections will work.

ASUS SpaceLink 802.11g Access Point

Table of Contents