Roaming Guidelines (Spacelink™ Gateways Or Aps) - Asus WL-300g User Manual

Spacelink 802.11g access point
Hide thumbs Also See for WL-300g:
Table of Contents

Advertisement

Roaming Guidelines
An 802.11b PC Card can only roam between 802.11b Access Points.
All SpaceLink Access Points must have the same SSID.
All computers with SpaceLinkPC card or CF card adapters must have
the same SSID as the Access Points that they will roam between.
If WEP encryption is enabled, then all SpaceLink Access Points and
client adapters must use the same encryption level and WEP Key(s) to
communicate.
The SpaceLink Access Points' cells must overlap to ensure that there
are no gaps in coverage and to ensure that the roaming client will always
have a connection available.
SpaceLink Access Points that use the same Channel should be installed
as far away from each other as possible to reduce potential interference.
It is strongly recommended that you perform a site survey using the
utility provided with the SpaceLinkPC card or CF card to determine the
best location for each SpaceLink 802.11g Access Point in the facility.
ASUS SpaceLink 802.11g Access Point
Chapter 1 - Introduction
13

Advertisement

Table of Contents
loading

Table of Contents