Product Features; Technical Data - Bosch AL 2215 CV Original Instructions Manual

OBJ_BUCH-190-008.book Page 7 Wednesday, March 15, 2017 8:34 AM
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Do not cover the ventilation slots of the battery charg-
er. Otherwise, the battery charger can overheat and no
longer operate properly.

Product Features

The numbering of the product features refers to the illustra-
tion of the battery charger on the graphics page.
1 Battery pack*
2 Green battery charge indicator
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Battery Charger
Article number
Battery charging voltage (automatic
voltage detection)
Charging current
Allowable charging temperature
range
Charging time for battery capacity,
approx.
– 1.0 Ah
– 1.3 Ah
– 1.5 Ah
– 2.0 Ah
Number of battery cells
Weight according to EPTA-
Procedure 01:2014
Protection class
Bosch Power Tools
Operation
Starting Operation
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the battery charger is inserted into the socket and the battery
1 or the power tool with the slid on battery 1 is inserted on the
battery charger. The power tool cannot be switched on during
charging.
Firstly, place the battery 1 as shown in the figure onto the
front of the battery charger () and then press the battery 1
down at the rear (). To remove the battery, proceed in re-
verse order.
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery is
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Note: The charging procedure is only possible when the bat-
tery temperature is within the allowable charging tempera-
ture range, see "Technical Data" section.
Meaning of the Indication Elements
Flashing Battery Charge Indicator 2
Continuous Lighting of the Battery Charge Indicator 2
AL 2215 CV
2 607 225 4..
V 14.4 – 21.6
in the allowable charging temperature range, and cannot be
mA 1500
charged for this reason. The battery is charged as soon as the
allowable charging temperature range is reached.
°C 0 – 45
When the battery is not inserted, continuous lighting of the
battery charge indicator 2 indicates that the mains plug is in-
100 %
serted in the socket and that the battery charger is ready for
operation.
min 45
min 55
min 63
min 85
4 – 6
kg 0.40
/ II
English | 7
The charging procedure is signalled by a
flashing battery charge indicator 2.
Continuous lighting of the battery
charge indicator 2 indicates that the
battery is fully charged or that the
temperature of the battery is not with-
1 609 92A 3V5 | (15.3.17)