KNOW YOUR SPRAYER
Read this owner's manual and safety rules before operating
Compare the illustration below with your sprayer to familiarize yourself with the various controls and their locations.
ON=OFF PUMP SWITCH
ON=OFF BOOM VALVE
ON-OFF PUMP SWITCH -- Turns the pump motor on or off.
SPRAY GUN NOZZLE -- Adjusts the spray from a cone shaped fine mist to a straight stream.
BYPASS VALVE -- Controls the operating pressure of the boom or spray gun.
ON-OFF BOOM VALVE --Turns
the boom nozzles on or off.
It is important to test the boom and spray gun with
plain water before using chemicals. This will enable
you to check the sprayer for leaks and to set the
spray pattern and nozzle pressure. If a leak should
occur, thread tape may be used to better seal the