Shutting Down The Computer - HP Mini User Manual

●
Use the
●
If you leave your work, initiate Sleep or Hibernation, or shut down the computer.

Shutting down the computer

CAUTION:
The Shut down command closes all open programs, including the operating system, and then turns
off the display and computer.
Shut down the computer under any of the following conditions:
●
When you need to replace the battery or access components inside the computer
●
When you are connecting an external hardware device that does not connect to a USB port
●
When the computer is unused and disconnected from external power for an extended period
Although you can shut down the computer with the power switch, the recommended procedure is to
use the Windows Shut down command.
To shut down the computer, follow these steps:
NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or
Hibernation before shut down is possible.
1. Save your work and close all open programs.
2. Tap Start.
3. Tap Shut down.
If the computer is unresponsive and you are unable to use the preceding shut down procedures, try
the following emergency procedures in the sequence provided:
●
Press the Windows Security button on the left side of the Slate, and then slide the power switch.
●
Slide and hold the power switch for at least 5 seconds.
●
Disconnect the computer from external power and remove the battery.
24 Chapter 4 Power management
f2 and f3 action keys to adjust screen brightness as needed.
Unsaved information will be lost when the computer is shut down.