Protection against electric shock
Protections rating
Operating conditions
Spectrum
Maximum variation of the light
output over the treatment area
Operating pressure
Altitude
Pulse duration
Duration of the pulsetrain
Pulse interval
Optical homogeneity
Maximum optical energy
Troubleshooting
This chapter summarizes the most common
problems you could encounter with the device. If
you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Class II
IP 30 (EN 60529)
Temperature: 5 °C to 35 °C
Relative humidity: 15% to 75%
>530nm
<20%
700hPa-1060hPa
max. 3000m
0.8 +/ -0.2 mSeconds
Single pulse
0.9-1.9s
(BRI863/BRI863/BRI864)
1-3-2.9s (BRI860/BRI861)
1.5-3.5s (BRI858)
+/- 20% deviation from average
optical exposure in treatment
area
5.7 - 12.8J
35
English