GE JGP329 Installation Instructions Manual page 13

30" sealed gas cooktop
Hide thumbs Also See for JGP329:
Table of Contents

Advertisement

Available languages

Available languages

MAKING THE PROPANE (LP) CONVERSION
IF SOLD OUTSIDE THE U.S. AND CANADA:
WARNING
If you wish to use this product
with Liquefied Petroleum (LP) gas containing greater
than 10% butane, you must purchase a butane
conversion kit. To order, please call 1.888.664.8403 or
1.787.276.4051.
Model
JGP940
JGP333 &
PGP943
JGP329
1 SAFETY INFORMATION YOU SHOULD KNOW
The pressure regulator and burner orifices are set for
natural gas. To use Propane (LP) gas, the regulator
and burner orifices must be converted. The Propane
(LP) orifice spuds for the cooktop burners are attached
to the regulator along with separate Propane (LP)
conversion instructions.
WARNING
This conversion kit shall
be installed by a qualified service agency in
accordance with the manufacturer's instructions
and all applicable codes and requirements of the
authority having jurisdiction. If the information
in these instructions is not followed exactly, a
fire, explosion or production of carbon monoxide
may result causing property damage, personal
injury or loss of life. The qualified service agency
is responsible for the proper installation of this kit.
The installation is not proper and complete until
the operation of the converted appliance is checked
as specified in the manufacturer's instructions
supplied with the kit.
Installation Instructions
Butane Kit #
WB28T10228
WB28T10283
WB28T10234
TOOLS YOU WILL NEED
FOR PROPANE (LP) CONVERSION
Phillips-Head
Screwdriver
Pliers
Safety Glasses
CAUTION
factory, is set for use with natural gas. If you wish to
use your cooktop with Propane (LP) gas, you must first
replace the orifices and convert the pressure regulator.
CAUTION
be made before turning on the burner. Failure to do
so could result in serious injury. Be sure pressure
regulator has been converted as described in Step 2.
CAUTION
conversion, shut off the gas supply to the appliance
prior to disconnecting the electrical power.
13
7mm Nutdriver
No. 15 Torx-Head
Driver
Small Flat-Head
Screwdriver (4mm or
5/32 tip size, 60mm or
2-3/8" long)
The cooktop, as shipped from the
The following adjustments must
Before proceeding with the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jgp333Pgp943Jgp940

Table of Contents