Listening To Music - Sony TMR-BT10 Operating Instructions Manual

OPERATING THE UNIT

Listening to music

POWER
button
Multi function
button
Check the following before
operating the unit.
– Pairing of this unit and the
BLUETOOTH receiving device is
complete.
– The BLUETOOTH receiving
device supports the receiving
music function (profile: A2DP).
1
Connect the stereo mini
plug of this unit to the
headphone jack of a
stereo audio source
device.
Note
When connecting to a stereo audio
source device, be sure to connect
this unit to the headphone jack, not
to the LINE OUT jack.
2
Turn on the stereo
audio source device.
12
US
TMR-BT10_CA2 [US,FR] 2-698-600-51(1)
3
Press and hold the
POWER button for
about 3 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice and then the unit is
turned on.
Do not press and hold the
POWER button for more than
7 seconds, otherwise pairing
mode is entered.
Tip
While searching a BLUETOOTH
receiving device, the indicator
(blue) keeps flashing.
4
Turn on the BLUETOOTH
receiving device to
standby for making the
BLUETOOTH connection.
The BLUETOOTH connection
is established between this unit
and the BLUETOOTH
receiving device.
Notes
• Make sure to turn on only the
BLUETOOTH receiving device
you want to connect with this
unit. If many BLUETOOTH
receiving devices are turned on,
the connection may not be done
as you desire.
• If this unit cannot make the
BLUETOOTH connection with a
paired device, pair the device
again, or try making the
BLUETOOTH connection from
the BLUETOOTH receiving
device if possible.