Advertisement
XV-S56BK/XV-S57SL
Removing the spindle motor assembly
1.
Remove the three screws L attaching the spindle
motor on the bottom of the mechanism base.
ATTENTION:
When reattaching, pass the card wire
extending from the spindle motor
board through the notch of the spindle
base.
2.
Remove the three screws M attaching the spindle
base.
1-14
(See Fig.19 to 21)
L
L
Fig.19
Spindle motor assembly
Spindle base
Fig.20
M
Fig.21
Spindle motor
L
M
Spindle base
Mechanism base
Advertisement
