Table of Contents
Advertisement
3.1
Main body section
3.1.1 Removing the top cover (See Figure 1)
(1) Remove the two screws A attaching the top cover on both
sides of the main body.
(2) Remove the three screws B attaching the top cover on the
back of the main body.
(3) Raise the both sides and lower part of the rear of the top
cover, with opening them slightly in an outward direction.
And the top cover will be removed.
3.1.2 Removing the front panel assembly (See Figure 2)
• Prior to performing the following procedure, remove the top
cover.
• There is no need to remove the mechanism assembly.
(1) Hook a and b are removed respectively, and the front panel
assembly is removed.
SECTION 3
DISASSEMBLY
A
x
2
Hook a
TOP COVER
TOP COVER
TOP COVER
B
Fig.1
Hook b
Hook b
Front panel
assembly
Hook b
Fig.2
B
B
Hook a
(No.YD095)1-9
Advertisement
Table of Contents
