JVC XV-BP10J Service Manual page 21

TRAINING MASTER FOR BLU-RAY (BD)
2-4. No Signal
A "no signal" message appears on the screen of the display.
Does the BD on-screen
menu appear?
YES
What cables is the customer
using to connect the BD?
YES
Is the TV set to the
correct input?
YES
Is the customer able to
watch TV programming?
YES
Can the customer connect
the BD to another TV?
YES
Has the customer tried
another set of cables?
Make sure the customer did not select 480i resolution in the
NO
menu of the BD player if using HDMI connections. Change resolution on
upconversion BD player by pushing the resolution button of the remote con-
Determine what cables the customer is using to connect the BD
to the TV and if connected properly. Refer to OM for connections.
NO
Tighten any loose cables. Make sure the customer is not connecting a
BD to VCR or BD to DVD Recorder. Copy protection can distort
NO
If the customer is not able to watch television then he may have a
NO
problem with his television, especially if the cable signal comes
through on a different input. If the customer can not get a TV program,
then he still may have a problem with the particular input on his TV.
Have the customer connect the BD to another TV in order to
NO
determine if the problem is the BD or the TV. Refer to the OM for
connections assistance. If the BD works on the second TV,
then the customer has a problem with his TV.
Have the customer try another set of cables. A bad cable
NO
can also cause video problems. Test the cable with another device to
the TV to also determine if the TV is bad. If BD is problem,
please see service chart for service information.
3-10
troller. HDMI don't support 480i resolution.
the picture on older VCR models.
Make sure the TV is on the correct input.
Turn TV off, then on to determine input.
Video when using composite.
HDMI when using HDMI.