Sangean H205 User Manual
  1. Manuals
  2. Brands
  3. Sangean Manuals
  4. Radio
  5. H205
  6. User manual

Sangean H205 User Manual

Hide thumbs

Advertisement

Table of Contents

H205
GB
Version 1

Advertisement

Table of Contents
loading

Related Manuals for Sangean H205

Summary of Contents for Sangean H205

  • Page 1 H205 Version 1...

  • Page 3: Lcd Display

    Controls Carrying strap holder Preset 1 Preset 2 Preset 3/STEP button Preset 4 LCD display Preset 5/ Time Set button Tuning Up/Down button Power button Speaker Emergency Buzzer/WX ALERT button(Weather alert button) Volume Up/Down button Band /Timer button DC IN socket Hook holder Wire antenna hole USB socket for software upgrade (for factory or customer services only)

  • Page 4: Installing Batteries

    Installing batteries 1. Position the radio face down on a soft surface. 2. Open the catch as shown and lift up the battery cover. 3. Insert 2 x “D” size/UM-1/R20 batteries. 4. Replace the battery cover and catch. 5. Reduced power, distortion, a “stuttering” sound are all signs that the batteries may need replacing. The batteries should be replaced when the battery indicator flashes and E shows in the display.

  • Page 5: Setting The Clock

    Setting the clock 1. The clock will start running when the batteries are installed or when the radio is connected to an AC Outlet. The display will show “ -- : -- -- ’’. 2. The time can only be set when the radio is switched off. 3.

  • Page 6: Recalling Preset Stations

    Search tuning. 1. Press the Power button to turn on the radio. 2. Press the Band button to select the required band, then extend and position the wire antenna (FM) or rotate the radio (AM) to get best reception. 3. Press and hold the Tuning Up/Down button to start the search tuning. Your radio will scan in an upwards direction (low frequency to high frequency) or downwards direction (high frequency to low frequency) and stop automatically when it finds a station of sufficient strength.
  • Page 7 Software version/FM range setting/Setting tuning step Software version The software display cannot be altered and is just for your reference. 1. Turn off the radio. 2. Press and hold the STEP button for 2 seconds until the software version number (e.g. P01) is shown on the display.

  • Page 8: Weather Alert System

    Weather alert system The weather alert function on the radio can alert you to special weather related emergencies. During an emergency or weather related hazard, NOAA issues an emergency tone that will set off an audible and/ or visual alarm on the radio. Note: Hazard warnings are not available in all areas.

  • Page 9: Factory Reset

    Sleep function – Auto Off The sleep timer will automatically switch off your radio after a preset time has elapsed. 1. Press and continue to hold down the Power button, the display will cycle through the available sleep times in this order 30-20-10-60-50-40-30………… Release the button when the required sleep time appears in the display.

  • Page 10: Display Backlight

    Display backlight The display backlight will be switched on for approximately 10 seconds when any button is pressed. Emergency buzzer To activate the Emergency buzzer, press and hold the Emergency buzzer button ( ). Pressing and releasing the Emergency buzzer button ( ) again or the Power button will switch off the buzzer.

  • Page 11: Specifications

    AM Ferrite Rod: Built in Sangean reserves the right to amend the specifications without notice. If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Table of Contents