Memory Functions - Bosch PLR 50 Original Instructions Manual

30 | English
Deleting Measured Values
Briefly pressing button 7 deletes the last individual measuring
value determined in all measuring functions. Briefly pressing
the button repeatedly deletes the individual measured values
in reverse order.

Memory Functions

When switching off the measuring tool, the value in the memory
is retained.
Storing/Adding Measured Values
If a value is already stored in the memory, the new value is
added to the memory contents, however, only when the meas-
ures of unit correspond.
As an example, when an area value is in the memory and the
current measured value is a volume value, the addition cannot
take place. "Error" briefly flashes in the display.
Subtracting Measured Values
Push the memory subtraction button 8 in order to subtract the
current measured value from the memory value. As soon as a
value has been subtracted, "M" is indicated in the display and
the "–" behind it briefly flashes.
If a value is already stored in the memory, the new measured
value can be subtracted only when the measures of unit cor-
respond (see "Storing/Adding Measured Values").
Displaying the Stored Value
Deleting the Memory
To delete the memory contents, first push the memory retrieve
button 4, so that "M=" is indicated in the display. Then briefly
press button 7; "M" is no longer indicated in the display.
2 609 140 621 | (25.6.09)
Push the memory add button 2 in order to
store the current measured value – a
length, area or volume value, depending
on the current measuring function. As
soon as a value has been stored, "M" is
indicated in the display and the "+" be-
hind it briefly flashes.
Push the memory retrieve button 4 in
order to display the value stored in the
memory. "M=" is indicated in the display.
When the memory contents "M=" is in-
dicated in the display, it can be doubled
by pushing the memory add button 2 or
set to zero by pushing the memory sub-
tract button 8.
Bosch Power Tools