Specifications; General Power Tool Safety Warnings - Makita DPB180 Instruction Manual

ENGLISH (Original instructions)
1. Battery cartridge
2. Button
3. Red indicator
4. Star marking
5. Lock-off button
6. Switch trigger
7. Speed adjusting dial
8. Lamp
9. Tighten
10. Loosen

SPECIFICATIONS

Max. cutting capacity
Blade size
Overall dimensions (L x W x H)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
Intended use
The tool is intended for cutting in wood, plastic and
ferrous materials.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Explanation of general view
11. Protrusion
12. Lever
13. Blade
14. Bearing
15. Upper holder
16. Lower holder
17. Wheel
18. Press
19. Blade guide
20. Groove
Model
Round workpiece
Rectangular workpiece
Blade speed
Length
Width
Thickness
Net weight
END004-6
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
ENE009-1
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
GEA006-2
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
21. Screw
22. Stopper plate
23. Cutting wax
24. Tire
25. Lip
26. Limit mark
27. Screwdriver
28. Brush holder cap
DPB180
120 mm dia.
120 mm x 120 mm
1.4 - 2.7 m/s
1,140 mm
13 mm
0.5 mm
523 mm x 231 mm x 313 mm
6.5 kg
D.C. 18 V
5