Download  Print this page

Changing Monitor Settings; Checking Your Monitor Revision; Getting Started - Philips MP2 Instructions For Use Manual

Intellivue patient monitor.
Hide thumbs

Advertisement

Changing Monitor Settings

To change monitor settings such as brightness, or QRS tone volume:
Press the SmartKeys key
1
Either Select the appropriate SmartKey for the setting you want to change
2
Or Enter the
enter a submenu where you can change the settings.
Adjusting the Screen Brightness
Select the
1
2
Select the appropriate setting for the screen brightness. 10 is the brightest, 1 is the least bright.
Optimum
monitors.
Your monitor may be configured with a lower brightness for Standby mode and also for transport to
conserve battery power. These settings can only be changed in the monitor's Configuration Mode.
Setting the Date and Time
Enter the
Date, Time
Select, in turn, the
1
the correct values from the pop-up list.
Select
2
If your monitor is connected to an Information Center, the date and time are automatically taken from
this. Once it is set, the internal clock retains the setting even when you switch off the monitor.

Checking Your Monitor Revision

Select
1
Select the correct device from the device pop-up keys.
2
From the
3
information.

Getting Started

Once you understand the basic operation principles and have completed the Training Program, you
can get ready for monitoring.
menu by selecting the
Main Setup
Brightness
SmartKey.
is suitable for most monitoring locations and optimizes power usage for battery powered
Main Setup
menu by selecting the
menu.
,
,
Year
Month
Day
to change the date and time.
Store Date, Time
Main Setup
then select
Revisions
menu, select the monitor component for which you need revision
Monitor Revision
.
SmartKey; then select
Main Setup
Main Setup
SmartKey, then select
,
(in 24 hour format, only) and
Hour
to open the
Monitor Revision
1 Basic Operation
User Interface
Date, Time
to enter the
as necessary. Select
Minute
menu.
to
37

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: